Vector Portable Generator SMATE200A User Manual
Version  
01.00  
April  
2005  
Vector Signal Generator ¸SMATE200A  
Configuration Guide  
 
Option overview  
Base Unit  
SMATE200A  
SMATE-B  
SMATE-K  
1400.7005.02  
Hardware  
Option  
Software  
Option  
Vector Signal  
Generator  
RF path A  
SMATE-B103  
SMATE-B106  
1401.1000.02  
1401.1200.02  
100 kHz to 3 GHz  
1st RF Path  
100 kHz to 6 GHz  
1st RF Path  
RF path B  
SMATE-B206  
SMATE-B22  
SMATE-B31  
1401.2507.02  
1401.1800.02  
SMATE-B203  
1401.1400.02  
1401.1600.02  
FM/PhiM Modulator  
and Low Phase Noise  
High Power Output  
1st RF Path  
100 kHz to 3 GHz  
2nd RF Path  
100 kHz to 6 GHz  
2nd RF Path  
SMATE-B13  
Baseband  
Options marked with  
stalled twice (first in baseband path  
A, second in baseband path B)  
1401.2907.02  
2x  
SMATE-B22  
SMATE-B36  
2x can be in-  
1401.2507.02  
1401.2107.02  
Baseband Main  
Module  
FM/PhiM Modulator  
and Low Phase Noise  
High Power Output  
2nd RF Path  
SMATE-K62  
SMATE-B10  
SMATE-B11  
1404.5807.02  
1401.2707.02  
1401.2807.02  
2x  
2x  
2x  
Baseband Generator  
ARB (64 MSamples)  
Baseband Generator  
ARB (16 MSamples)  
Additive White  
Gaussian Noise  
SMATE-B16  
1401.2407.02  
Differential  
I/Q out  
SMATE-K42  
SMATE-K40  
SMATE-K46  
SMATE-K61  
SMATE-K11  
SMATE-K12  
SMATE-K13  
SMATE-K14  
1404.5207.02  
1404.5107.02  
1404.5507.02  
1404.5707.02  
1404.5907.02  
1404.6003.02  
1404.6090.02  
1404.6203.02  
2x  
2x  
2x  
2x  
2x  
2x  
2x  
2x  
Digital Standard  
CDMA2000  
incl. 1xEV-DV  
Digital Standard  
3GPP FDD  
Digital Standard  
GSM / EDGE  
Multicarrier CW  
Signals  
Digital Standard  
IS-95  
Digital Standard  
CDMA2000  
Digital Standard  
3GPP TDD  
Digital Standard  
TD-SCDMA  
SMATE-K43  
SMATE-K15  
SMATE-K17  
SMATE-K19  
SMATE-K20  
1404.5307.02  
1404.6303.02  
1404.6403.02  
1404.6503.02  
1404.6603.02  
2x  
2x  
2x  
2x  
2x  
3GPP Enhanced  
MS/BS Tests  
incl. HSDPA  
Digital Standard  
3GPP FDD  
incl. HSDPA  
User-Defined  
OFDM Signals  
Digital Standard  
1xEV-DO  
Digital Standard  
IEEE 802.11 (a/b/g)  
Vector Signal Generator R&S SMATE200A  
3
 
 
Single-path instrument  
Applies if the instrument is equipped with one RF path and no more than one baseband path.  
Step c Configure RF path  
MANDATORY  
Choose frequency range (only one choice possible)  
MANDATORY  
Option  
Description  
Requires  
Not compatible with  
SMATEB106  
HW or SW Remarks  
SMATEB103 100 kHz to 3 GHz  
SMATEB106 100 kHz to 6 GHz  
SMATE200A  
SMATE200A  
HW  
HW  
Factory-installed  
Factory-installed  
SMATEB103  
Choose output configuration  
OPTIONAL  
Option  
Description  
Requires  
SMATEB10x  
Not compatible with  
-
HW or SW Remarks  
SMATE-B22 Low Phase Noise and analog  
modulation FM and PhiM  
HW  
Factory-installed  
SMATE-B31 High-Power Output  
SMATEB10x  
-
HW  
Factory-installed  
Step d Configure baseband path  
OPTIONAL  
Choose baseband source  
MANDATORY  
Option  
Description  
Requires  
SMATEB10x  
Not compatible with  
-
HW or SW Remarks  
SMATE-B13 Baseband Main Module  
HW  
Factory-installed.  
Requires SMATEB10, SMATE-B11 or SMATEK62.  
Factory-installed  
SMATE-B10 Baseband Generator with  
ARB (64 MSamples) and  
Digital Modulation  
SMATE-B11 Baseband Generator with  
ARB (16 MSamples) and  
SMATE-B13  
SMATE-B13  
SMATEB11  
SMATEB10  
HW  
HW  
HW  
Factory-installed  
Digital Modulation  
Choose baseband hardware  
SMATE-B16 Differential I/Q Output  
OPTIONAL  
SMATE-B10 or B11  
-
Factory-installed  
Choose digital modulation systems  
OPTIONAL  
Option  
Description  
Requires  
Not compatible with  
HW or SW Remarks  
SMATE-K40 Dig. Std. GSM/EDGE  
SMATE-K42 Dig. Std. 3GPP FDD  
SMATE-K43 3GPP enhanced MS/BS tests  
incl. HSDPA  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-K42  
-
-
-
SW  
SW  
SW  
SMATE-K46 Dig. Std. CDMA2000  
SMATE-K61 Multicarrier CW Signal  
Generation  
SMATE-B10 or B11  
SMATE-B10 or B11  
-
-
SW  
SW  
Vector Signal Generator R&S SMATE200A  
4
 
 
Choose digital modulation systems with R&S WinIQSIM™ 1  
OPTIONAL  
Option  
Description  
Requires  
Not compatible with  
HW or SW Remarks  
SMATE-K11 Dig. Std. IS-95  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
-
-
-
-
-
-
-
-
SW  
SW  
SW  
SW  
SW  
SW  
SW  
SW  
With WinIQSIM™  
With WinIQSIM™  
With WinIQSIM™  
With WinIQSIM™  
With WinIQSIM™ and WinIQOFDM  
With WinIQSIM™  
With WinIQSIM™  
SMATE-K12 Dig. Std. cdma2000  
SMATE-K13 Dig. Std. 3GPP TDD  
SMATE-K14 Dig. Std. TD-SCDMA  
SMATE-K15 User-Defined OFDM Signals  
SMATE-K17 Dig. Std. 1xEV-DO  
SMATE-K19 Dig. Std. IEEE 802.11 (a/b/g)  
SMATE-K20 Dig. Std. 3GPP incl. HSDPA  
With WinIQSIM™  
SMATE-K5  
Bluetooth  
SMATE-B10 or B11  
-
SW  
With application software on an external PC  
Choose noise  
OPTIONAL  
Option  
Description  
Requires  
SMATE-B13  
Not compatible with  
-
HW or SW Remarks  
SW  
SMATE-K62 Additive White Gaussian  
Noise (AWGN)  
1
R&S WinIQSIM™ requires an external PC.  
Vector Signal Generator R&S SMATE200A  
5
 
 
Two-path instrument  
Applies if the instrument is equipped with up to two RF paths and up to two baseband paths.  
Step c Configure RF path A  
MANDATORY  
Choose frequency range (only one choice possible)  
MANDATORY  
Option  
Description  
Requires  
Not compatible with  
SMATEB106  
HW or SW Remarks  
SMATEB103 100 kHz to 3 GHz  
SMATEB106 100 kHz to 6 GHz  
SMATE200A  
SMATE200A  
HW  
HW  
Factory-installed  
Factory-installed  
SMATEB103  
Choose output configuration  
OPTIONAL  
Option  
Description  
Requires  
SMATEB10x  
Not compatible with  
-
HW or SW Remarks  
SMATE-B22 Low Phase Noise and analog  
modulation FM and PhiM  
HW  
Factory-installed  
SMATE-B31 High-Power Output  
SMATEB10x  
-
HW  
Factory-installed  
Step d Configure RF path B  
OPTIONAL  
Choose frequency range (only one choice possible)  
MANDATORY  
Option  
Description  
Requires  
Not compatible with  
SMATEB206  
HW or SW Remarks  
SMATEB203 100 kHz to 3 GHz  
SMATEB206 100 kHz to 6 GHz  
SMATEB10x  
SMATEB10x  
HW  
HW  
Factory-installed  
Factory-installed  
SMATEB203  
Choose output configuration  
OPTIONAL  
Option  
Description  
Requires  
Not compatible with  
-
HW or SW Remarks  
SMATE-B22 Low Phase Noise and analog  
modulation FM and PhiM  
SMATEB10x  
HW  
Factory-installed  
Second option for path B. If only once installed it will  
added to path A automatically.  
SMATE-B36 High-Power Output  
SMATEB20x  
-
HW  
Factory-installed  
Vector Signal Generator R&S SMATE200A  
6
 
 
Step e Configure baseband path A  
OPTIONAL  
Choose baseband source  
MANDATORY  
Option  
Description  
Requires  
SMATEB10x  
Not compatible with  
-
HW or SW Remarks  
SMATE-B13 Baseband Main Module  
HW  
HW  
HW  
Factory-installed. Requires SMATE-B10, SMATE-  
B11 or SMATE-K62.  
SMATE-B10 Baseband Generator with  
ARB and Digital Modulation  
SMATE-B11 Baseband Generator with  
ARB (16 MSamples) and  
SMATE-B13  
(in baseband path A)  
SMATE-B13  
SMATE-B11  
(in baseband path A)  
SMATE-B10  
Factory-installed  
Factory-installed  
(in baseband path A)  
(in baseband path A)  
Digital Modulation  
Choose baseband hardware  
SMATE-B16 Differential I/Q Output  
OPTIONAL  
Can only be installed only once.  
Factory-installed  
SMATE-B10 or B11  
(in baseband path A)  
HW  
Choose digital modulation systems  
OPTIONAL  
Option  
Description  
Requires  
Not compatible with  
HW or SW Remarks  
SMATE-K40 Dig. Std. GSM/EDGE  
SMATE-K42 Dig. Std. 3GPP FDD  
SMATE-K43 3GPP enhanced MS/BS tests  
incl. HSDPA  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-K42  
-
-
-
SW  
SW  
SW  
SMATE-K46 Dig. Std. CDMA2000  
SMATE-K61 Multicarrier CW Signal Gen-  
eration  
SMATE-B10 or B11  
SMATE-B10 or B11  
-
-
SW  
SW  
Choose digital modulation systems with R&S WinIQSIM™ 1  
OPTIONAL  
Option  
Description  
Requires  
Not compatible with  
HW or SW Remarks  
SMATE-K11 Dig. Std. IS-95  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
-
-
-
-
-
-
-
-
SW  
SW  
SW  
SW  
SW  
SW  
SW  
SW  
With WinIQSIM™  
With WinIQSIM™  
With WinIQSIM™  
With WinIQSIM™  
With WinIQSIM™ and WinIQOFDM  
With WinIQSIM™  
With WinIQSIM™  
SMATE-K12 Dig. Std. cdma2000  
SMATE-K13 Dig. Std. 3GPP TDD  
SMATE-K14 Dig. Std. TD-SCDMA  
SMATE-K15 User-Defined OFDM Signals  
SMATE-K17 Dig. Std. 1xEV-DO  
SMATE-K19 Dig. Std. IEEE 802.11 (a/b/g)  
SMATE-K20 Dig. Std. 3GPP incl. HSDPA  
With WinIQSIM™  
SMATE-K5  
Bluetooth  
SMATE-B10 or B11  
-
SW  
With application software on an external PC  
1
R&S WinIQSIM™ requires an external PC.  
Vector Signal Generator R&S SMATE200A  
7
 
 
Choose noise  
OPTIONAL  
Option  
Description  
Requires  
SMATE-B13  
Not compatible with  
-
HW or SW Remarks  
SW  
SMATE-K62 Additive White Gaussian  
Noise (AWGN)  
Step f Configure baseband path B  
OPTIONAL  
Choose baseband source  
MANDATORY  
Option  
Description  
Requires  
SMATE-B13  
(in baseband path A)  
SMATE-B13  
Not compatible with  
-
HW or SW Remarks  
SMATE-B13 Baseband Main Module  
HW  
Factory-installed. Requires SMATE-B10, SMATE-  
B11 (in baseband path A or B) or SMATE-K62.  
Factory-installed  
SMATE-B10 Baseband Generator with  
SMATE-B11 in path A  
HW  
ARB and Digital Modulation (in baseband path A or B)  
and SMATE-B10  
SMATE-B11  
(in baseband path B)  
SMATE-B10  
(in baseband path A)  
SMATE-B11 Baseband Generator with  
SMATE-B13  
(in baseband path A or B)  
and SMATE-B10 or  
SMATE-B11  
HW  
Factory-installed  
ARB (16 MSamples) and  
Digital Modulation  
(in baseband path B)  
(in baseband path A)  
Choose digital modulation systems  
OPTIONAL  
Option  
Description  
Requires  
Not compatible with  
HW or SW Remarks  
SMATE-K40 Dig. Std. GSM/EDGE  
SMATE-K42 Dig. Std. 3GPP FDD  
SMATE-K43 3GPP enhanced MS/BS tests  
incl. HSDPA  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-K42  
-
-
-
SW  
SW  
SW  
SMATE-K46 Dig. Std. CDMA2000  
SMATE-K61 Multicarrier CW Signal Gen-  
eration  
SMATE-B10 or B11  
SMATE-B10 or B11  
-
-
SW  
SW  
Vector Signal Generator R&S SMATE200A  
8
 
Choose digital modulation systems with R&S WinIQSIM™ 1  
OPTIONAL  
Option  
Description  
Requires  
Not compatible with  
HW or SW Remarks  
SMATE-K11 Dig. Std. IS-95  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
SMATE-B10 or B11  
-
-
-
-
-
-
-
-
SW  
SW  
SW  
SW  
SW  
SW  
SW  
SW  
With WinIQSIM™  
With WinIQSIM™  
With WinIQSIM™  
With WinIQSIM™  
With WinIQSIM™ and WinIQOFDM  
With WinIQSIM™  
With WinIQSIM™  
SMATE-K12 Dig. Std. CDMA2000  
SMATE-K13 Dig. Std. 3GPP TDD  
SMATE-K14 Dig. Std. TD-SCDMA  
SMATE-K15 User-Defined OFDM Signals  
SMATE-K17 Dig. Std. 1xEV-DO  
SMATE-K19 Dig. Std. IEEE 802.11 (a/b/g)  
SMATE-K20 Dig. Std. 3GPP incl. HSDPA  
With WinIQSIM™  
Choose noise  
OPTIONAL  
Option  
Description  
Requires  
SMATE-B13  
Not compatible with  
-
HW or SW Remarks  
SW  
SMATE-K62 Additive White Gaussian  
Noise (AWGN)  
Note:  
Digital modulation systems and noise can be used either in baseband path A or baseband path B. The digital modulation systems or noise will be required twice  
only if the baseband paths are used simultaneously. (For example, an instrument is equipped with one R&S SMATE-K40 and two R&S SMATE-B10. In this con-  
figuration, R&S SMATE-K40 can be used either on baseband path A or baseband path B. For simultaneous use on both baseband paths, R&S SMATE-K40 would  
be required twice.)  
As only one set of Differential I/Q outputs SMATE-B16 can be installed, they can be switched to path A or B like the I/Q-outputs.  
1
R&S WinIQSIM™ requires an external PC.  
Vector Signal Generator R&S SMATE200A  
9
 
 
Configuration Examples  
The modular design of the R&S SMATE200A allows the instrument to be equipped with up to two paths. This allows a multitude of applications to be performed for which  
several signal generators were previously required.  
One baseband generator and one RF path  
One baseband generator and two RF paths  
SMATEB10x  
SMATEB20x  
SMATE-B10  
SMATE-B13  
SMATE-B13  
SMATE-B10  
SMATE-B13  
SMATEB10x  
Instrument configuration  
Instrument configuration  
Option  
Installed  
Description  
Base unit  
Frequency option 1st RF path  
Frequency option 2nd RF path  
Baseband main module  
Option  
Installed  
Description  
Base unit  
Frequency option  
Baseband main module  
Baseband generator  
SMATE200A  
SMATEB10x  
SMATE-B13  
SMATE-B10  
1x  
1x  
1x  
1x  
SMATE200A  
SMATEB10x  
SMATEB20x  
SMATE-B13  
SMATE-B10  
1x  
1x  
1x  
2x  
1x  
Baseband generator  
Application example  
Generation of digitally modulated signals  
Application example  
¾
¾
Interference test with same digital signal  
Simulation of antenna diversity  
¾
Vector Signal Generator R&S SMATE200A  
10  
 
 
One baseband generator and two RF paths  
Two baseband generators and two RF paths  
SMATEB10x  
SMATEB20x  
SMATE-B10  
SMATE-B13  
SMATE-B13  
SMATE-B10  
SMATE-B13  
SMATEB10x  
SMATEB20x  
SMATE-B10  
Instrument configuration  
Instrument configuration  
Option  
Installed  
Description  
Base unit  
Frequency option 1st RF path  
Frequency option 2nd RF path  
Baseband main module  
Option  
Installed  
Description  
Base unit  
Frequency option 1st RF path  
Frequency option 2nd RF path  
Baseband main module  
SMATE200A  
SMATEB10x  
SMATEB20x  
SMATE-B13  
SMATE-B10  
1x  
1x  
1x  
1x  
1x  
SMATE200A  
SMATEB10x  
SMATEB20x  
SMATE-B13  
SMATE-B10  
1x  
1x  
1x  
2x  
2x  
Baseband generator  
Baseband generator  
Application example  
Application example  
¾
Generation of a modulated signal on path A and a CW interferer on  
path B  
¾
Generation of a wanted signal and an interfering signal for receiver  
tests  
¾
Generation of multicarrier signals with extremely wide bandwidth  
(>80 MHz)  
Vector Signal Generator R&S SMATE200A  
11  
 
Ordering information  
Vector Signal Generator1  
R&S SMATE200A  
1400.7005.02  
including power cable, Quick Start Guide and CD-ROM  
(with operating and service manual)  
Options  
RF path A  
100 kHz to 3 GHz  
100 kHz to 6 GHz  
Low Phase Noise and analog modulation FM / PhiM  
High-Power Output  
R&S SMATEB103  
R&S SMATEB106  
R&S SMATE-B22  
R&S SMATE-B31  
1401.1000.02  
1401.1200.02  
1401.2507.02  
1401.1800.02  
RF path B  
100 kHz to 3 GHz  
100 kHz to 6 GHz  
Low Phase Noise and analog modulation FM / PhiM  
High-Power Output  
R&S SMATEB203  
R&S SMATEB206  
R&S SMATE-B22  
R&S SMATE-B36  
1401.1400.02  
1401.1600.02  
1401.2507.02  
1401.2107.02  
Baseband  
Baseband Generator with ARB (64 Msamples) and Digital Modulation  
(realtime)  
Baseband Generator with ARB (16 Msamples) and Digital Modulation  
R&S SMATE-B10  
R&S SMATE-B11  
1401.2707.02  
1401.2807.02  
(realtime)  
Baseband Main Module  
Differential I/Q Output  
R&S SMATE-B13  
R&S SMATE-B16  
1401.2907.02  
1401.2407.02  
Digital modulation systems  
Digital Standard GSM/EDGE  
Digital Standard 3GPP FDD  
3GPP enhanced MS/BS tests incl. HSDPA  
Digital Standard CDMA2000 incl. 1xEV-DV  
Multicarrier CW Signal Generation  
R&S SMATE-K40  
R&S SMATE-K42  
R&S SMATE-K43  
R&S SMATE-K46  
R&S SMATE-K61  
1404.5107.02  
1404.5207.02  
1404.5307.02  
1404.5507.02  
1404.5707.02  
Vector Signal Generator R&S SMATE200A  
12  
 
Digital modulation systems using R&S WinIQSIM™ 2  
R&S SMATE-K11  
R&S SMATE-K12  
R&S SMATE-K13  
R&S SMATE-K14  
R&S SMATE-K15  
1404.5907.02  
1404.6003.02  
1404.6090.02  
1404.6203.02  
1404.6303.02  
Digital Standard IS-95  
(with R&S WinIQSIM™)  
Digital Standard CDMA2000  
Digital Standard 3GPP TDD  
Digital Standard TD-SCDMA  
User-Defined OFDM Signals  
(with R&S WinIQSIM™)  
(with R&S WinIQSIM™)  
(with R&S WinIQSIM™)  
(with R&S WinIQSIM™  
and R&S WinIQOFDM)  
(with R&S WinIQSIM™)  
(with R&S WinIQSIM™)  
R&S SMATE-K17  
R&S SMATE-K19  
R&S SMATE-K20  
1404.6403.02  
1404.6503.02  
1404.6603.02  
Digital Standard 1xEV-DO  
Digital Standard IEEE 802.11 (a/b/g)  
Digital Standard 3GPP FDD incl. HSDPA (with R&S WinIQSIM™)  
Digital modulation systems using external PC software  
Bluetooth (with external SW)  
R&S SMATE-K5  
R&S SMATE-K62  
1404.7000.02  
1404.5807.02  
Noise  
Additive White Gaussian Noise (AWGN)  
Recommended extras  
Hardcopy manuals (in English, USA)  
19" Rack Adapter  
1401.0940.39  
1096.3283.00  
1109.3774.00  
1160.4545.02  
1157.6870.03  
1157.7060.02  
1134.8201.12  
R&S ZZA-411  
R&S ZZA-T45  
R&S SMATE-Z5  
R&S PSL-Z2  
R&S PSL-Z10  
R&S PSP-B6  
Adapter for Telescopic Sliders  
BNC Adapter for AUX I/O connector  
Keyboard with USB Interface (US assignment)  
Mouse with USB interface, optical  
External USB CD-RW Drive  
1
2
The base unit can only be ordered with an R&S SMATEB10x frequency option.  
R&S WinIQSIM ™ requires an external PC.  
Vector Signal Generator R&S SMATE200A  
13  
 
www.rohde-schwarz.com  
Europe: Tel. +49 1805 12 4242, e-mail: customersupport@rohde-schwarz.com · North America: Tel. +1 410-910-7988, e-mail: customer.support@rsa.rohde-schwarz.com  
Asia: Tel. +65 68463710, e-mail: customer-service@rssg.rohde-schwarz.com  
 

Toshiba Computer Monitor P32LSA User Manual
Toshiba Copier TRM User Manual
Toshiba Cordless Telephone SG 1600 User Manual
TP Link Network Card TL PA250 User Manual
Triarch Indoor Furnishings 60156 User Manual
Troy Bilt Chipper 204 User Manual
Tyco Electronics Computer Monitor B1ET 1215L User Manual
Univex Scanner NeatDesk User Manual
Vinotemp Refrigerator VT SC 1 User Manual
Vivotek Security Camera IP3137 User Manual